Welcome, If you have any questions, Please contact us Immediately

High Frequency Mobile Digital FPD C-arm System

Category:

Model: PLX118F

Equipment information

Equipment brief introduction

PLX118F is a mobile dynamic flat-panel C-arm specially designed for orthopedics, equipped with the latest amorphous silicon dynamic flat-panel detector, making it a mobile device that is more suitable for orthopedic clinical needs. This product can provide clear image effects, at the same time, it retains the characteristics of ordinary C-arm mobile, which optimizes the use environment of orthopedic surgery.

Clinical application: orthopedics, general surgery, trauma surgery, urology, spine surgery, pain surgery, gastroenterology, oncology, obstetrics and gynecology and other departments.

PLX118F Technical Specification

Configuration

1 C-arm new design mainframe 1 set
2 Combined high-frequency high-voltage X-ray generator monoblock

(5.0kW, 110 kHz, 40-120kV)

1 set
3 9*9 inch Dynamic flat panel detector 1 set
4 Medical using ultra-low illumination digital radiography 1 set
5 Digital acquisition workstation software 1 set
6 Imported dense grain grid 1 set
7 Electrical adjustable beam (collimator) 1 set
8 19 inch IM medical LCD monochrome monitor 1 set
9 Unique hand-held controller 1 set
10 Footbrake exposure 1 set

 

Technical Specification

Power supply High frequency inverter Power output: 5.0kW Main inverter frequency: 110 kHz
Automatic fluoroscopy Tube voltage 40 kv~120kv, adjust automatically.        Tube current : 0.3mA~~4mA adjust automatically
Manual fluoroscopy tube voltage 40 kv~120kv, continuous

tube current : 0.3mA~~4mA continuous

Pulse fluoroscopy tube voltage 40 kv~120kv, continuous

tube current : 0.3mA~~30mA continuous

Photography tube voltage, mA 40KV~120KV, 25mA~100mA, 1.0mAs~280mAs
X-ray tube special for high frequency Dual focus:0.3/1.5mm

thermal capacity: 650kJ (867kHu)

Detector 9*9 inch Dynamic flat panel detector
Monitor 19”medical LCD monochrome display *3 sets
Workstation software Image W/L adjust, grayscale conversion, interest area balance, turn, noise reduction, enhancement, smoothing, sharpening,

compression, zoom, measure, mark, print layout, Dicom image sending, Dicom image print and movie playback, etc.

Direction wheel and main wheel Direction wheel can rotate in any direction, and main wheel can rotate in ±90°
C-arm movement The up and down(motorized): 400mm;

Forward and backward movement: 200mm;

Revolution around horizontal axis :±180°;

Revolution around vertical axis: ±15°,

Distance from focus to screen: 1000 mm;

C-arm open distance: 800mm

C-arm arc depth: 660mm;

Slipping on orbit : 135°;

Reviews

There are no reviews yet.

Be the first to review “High Frequency Mobile Digital FPD C-arm System”

Your email address will not be published. Required fields are marked *

Scroll to Top